-
Re: NSV200 Azure vpn to NSa/Tz, traffic randomly stops passing over tunnel interface
@RedNet, try disabling "Send IKEv2 Invalid SPI Notify" on both firewalls then restart the tunnel and monitor it. That is the only issue I know about that presents similar behavior. If this … (View Post)1 -
Re: Address Objects
@HCECENES_93, is the device on the same subnet as the firewall or is it being routed through an intermediary router? If it is being routed before it hits the firewall, the mac will change to the rout… (View Post)1 -
Re: NSA 2600 - Route Disabled After Reboot
From the sounds of it, this issue is almost certainly bug ID GEN6-1275, we have a hotfix for this issue you can get from the support team. (View Post)2 -
Re: DPI vs SPI
@MPERU99 , every packet has two pieces, the header (source/destination, protocols, ports etc..) and the data(piece of the file/image etc..) that it carries. SPI only looks at the header data, so you … (View Post)1 -
Re: Standalone Configuration of SonicWall Switch 14-24FPOE
@Roz, The idea is the same as the last two examples. 7-12 VLAN -> 802.1Q -> Create your VLAN 220 VLAN -> 802.1Q -> Edit VLAN 220 and put port 7-12 in question as 'untagged' in the list Sw… (View Post)1