Comments
-
Hello @Kevin_YYC, Welcome to the SonicWall community. You can integrate a RADIUS MFA like RSA or Duo for GVC. Here are some links that should be helpful. Thanks!
-
Hello @shultis, Please go through the following KB article: If you are seeing DP core spikes, it is usually due to the real-time traffic passing through the firewall. Any management traffic including logging is handled by core 0 (control plane). If you have monitoring tools like Analytics/GMS, you should be able to see the…
-
@Noel, Glad that it is working correctly now. Thanks for sharing the solution here.
-
Hello @AndyLam, Welcome to the SonicWall community. That default route is set as per the primary WAN connection. Could you please check under MANAGE | Network | Failover and LB section. If you want X6 WAN to be used, make sure that X6 is on top in the default LB Group. Thanks!
-
@Edika, You can also report this from mysonicwall.com There is a Report Issues section at the bottom, you can go there and attach the necessary files as mentioned in the KB. Thanks!
-
Hello @Edika, If you believe it is a false positive, kindly follow the steps given in the following KB. The backend team will look into it. Thanks!
-
Hello @JohnG, Could you please check if web management is allowed over SSLVPN? You can refer to the KB below for all the steps. Thanks!
-
Hello @Rinconmike, 1) Audit new default exclusion domain names prior to being added for exclusion: This option is whenever SonicWall decides to add more default DPI SSL exclusions. This does not get auto-populated with connection failures based on your environment. You can see that there are 39 default exclusions in place,…
-
Hello @Noel, Kindly look at the GUI logs to see why the VPN connection is failing with the SOHO250. That should give us a clue wrt the configuration change required. MAC address change is not necessary for the VPN setup, it usually helps with the immediate devices connected like the ISP modem or the LAN switch. Thanks!
-
Hello @Rinconmike, I tested this in my lab setup and it seems to work even without tunnel all mode. You have LAN subnets added to the client routes and testing with the X0 IP address right? Thanks!
-
Hello @Rich65, Welcome to the SonicWall community. Have you created the access rule to block this IP from WAN to WAN? You can say discard on the rule so that the firewall does not even respond to the initial packet sent from this source. Thank you!
-
@Teleporter, H17127-229 should be the HF build you can apply. Thanks!
-
@Teleporter, Issue ID GEN7-21234 is created internally for tracking purposes. So kindly reach out to Support and provide them the issue ID so that they know which particular issue you are referring to. I had another customer with a similar problem recently even on 7.0.1. So, we have provided an HF build on 7.0.1 that…
-
Hello @Teleporter, Welcome to the SonicWall community. This looks similar to a reported issue with Issue ID: GEN7-21234. The Hotfix for this is already available. Kindly reach out to SonicWall support and they should be able to provide you with the HF. Thanks!
-
@Rinconmike, The others are optional guides. You can search for the KB articles on specific features that you want to configure. Thanks!