Comments
-
I did what you sad and same thing, no change.
-
I was told its not a good idea to go back to an old firmware version and there could be issues. I don't want to bring down out entire business.
-
Not sure what you need from me. as far as I know all rules and ports are right. Like I said this has been working right for many years. this just started 8 months ago and the only thing that change on my end was a SonicWALL firmware update.
-
its not still under warranty so SonicWALL wont help me at all.
-
And also like I Said, I found a work around and not sure if this adds anything towards troubleshooting the issue. I can get Lets Encrypt to work every time while I am downloading files. For example I will start 3, 2GB files downloading and then run the Lets Encrypt test and script and it will work and pass every time, so…
-
yes the access rule it there just like that, has been, like I said, all has been working fine for years, until this last SonicWALL firmware update. And if I take off any on that #2 the websites wont come up.
-
Anyone? So it looks like this is starting to lean toward an issue with the SonicWall. And that makes 100% sense as this started after the Last Firmware update in March-May, cant remember the month. SONICWALL CAN YOU PLEASE HELP WITH THIS!
-
I have 31 NAT rules, what ones would you like me to send?
-
I didn't use the "Wizard" to do anything so can you please tell me more about this? And is SonicWall looking into fixing this issue?
-
So I found a work around and not sure if this adds anything towards troubleshooting the issue. I can get Lets Encrypt to work every time while I am downloading files. For example I will start 3, 2GB files downloading and then run the Lets Encrypt test and script and it will work and pass every time, so what the heck is…
-
I have been hosing these same sites for 20 plus years, same IP's, DNS etc... I have been using LE for a couple years now. Like I said all has been fine and this just started about 8 months ago. Just trying to figure out why. It can only be two things at this point, COX my service provider or the SonicWall. As nothing else…
-
No, nothing enable on the WAN, only on the LAN and I don't use the default 443 port on the LAN.
-
Thank you, now were getting somewhere. Ran Lets Debug and its dropping the packets to port 80. Ethernet Header Ether Type: IP(0x800), Src=[84:8a:8d:f0:1c:19], Dst=[18:b1:69:34:67:65] IP Packet Header IP Type: TCP(0x6), Src=[172.104.24.29], Dst=[70.167.119.118] TCP Packet Header TCP Flags = [ACK,], Src=[57256], Dst=[80],…
-
I just went to the website and clicked on 4 different pages and then 10 seconds later this showed up on the packet monitor?