MustafaA SonicWall Employee
Reactions
Comments
-
@BWC and @mimiz I think it is a valid point to have the option to enable/disable a static route policy. This is noted to be shared with the Product Management team.
-
There are two things that you need to keep in mind. "Remote Subnet" needs to be part of the "VPN Access" for the user. The IP addresses or subnets that are under the "VPN Access" are pushed to the client as Client Routes. The Remote VPN IP scope needs to be part of the negotiation if policy based site to site VPN is used.…
-
If you are using public DNS record, you can define redundant IP address, so that if connection to public IP address of X1 fails, then it can be accessed through the public IP address of X2. Second option is to use Dynamic DNS feature on the firewall by selecting the binding to "Any". The Dynamic DNS public record will be…
-
It is always a good idea to have clean and lean configuration. Any unused Access Rule or NAT Policy, just delete them.
-
Also you are mentioning about IPSec VPN and your post is tagged as "SSLVPN". Can you add clarity please?
-
Hi @bridges Do you mean that you cannot access those two remote subnets with your statement "But I have another two sites which is connected to SOHO250 site to site vpn and can access those two remote subnet over the VPN."?
-
If your appliance still has Hardware Warranty, you can contact Technical Support and we will review the request.
-
The expired licenses will certainly not affect your login attempt as admin user.
-
Hello @swdee The error you are getting is related to the L2TP IP limitation of your firewall model. For instance, the following TSR - Technical Support Report is extracted from a TZ670 and it also has the same limitation. The IP count limit depends on the firewall model. Higher models have higher thresholds. I am also…
-
Although this is on the Administration page, the lockout policy applies to both the administrator and user as indicated. You will get the following window if you hit the failed login attempts.
-
@Larry , are you still getting the "404: Page Not Found" error? The reason I am asking is, because it works for me as of 11/30 at 2pm EST.
-
Please provide feedback if the hotfix firmware has resolved your issue. Also if you could indicate for how long the SonicWave 600 has been running, that would be helpful. For reference purposes, this issue is being tracked with WSC-4641.
-
I think the best option is to discuss this with one of our partners who can go through some questionnaires to asses the current network and security services requirements and some room for potential future growth.
-
Hi @Arkwright When the firewall uses TLS 1.0 or 1.1 to connect to the License server, it will be rejected and hence the license information will not be fetched. Any service that depends on license will be affected. Technically speaking if the firewall is updated with the License Keyset it should continue to operate until…