Comments
-
This approach is fine @Grady0298, just make sure you remove it before deploying it.
-
Hotfixes can be requested for each model.
-
@Sbishop , the appliance needs to be able to resolve the name. I am not sure if a DNS search suffix in the DNS settings will help here but if not, please put the full FQDN in the attribute.
-
For those affected by the browser check on Chrome in Big Sur, you can request hotfix for GEN6-1966 from the support team.
-
@Matt, try this link. https://www.sonicwall.com/techdocs/pdf/analytics-reports-for-a-syslog-based-solution.pdf The filters don't let you type or search right now but you can go to the log analyzer and filter for application and with the drop-down open, you can do a ctrl+f to find the app you are looking for.
-
Use the application section instead see below.
-
Gen6-995 and 6.5.4.8 should have the fix. You can ask for a hotfix from the support team @RedNet.
-
Hey @Enzino78, we cannot do L2 HA in Azure because of the platforms limitations. You may be able to do an active/active setup with load balancers (requires two uniquely licensed boxes) but this deployment requires you to keep the configurations in sync. The SMA 1000 series with pooled licensing and global high availability…
-
CFS policies have an order (top-down) where the first match is the policy that gets applied. You can leave a user in multiple rules as long as the top-down structure is fine.
-
It sounds like the switch is not setup properly with the trunks on the ports connected to the AP and FW. The other possibility would be missing access rules/DHCP scopes/DNS servers inaccessible etc..
-
@MPERU99, Monitor -> Appflow -> CTA Report. If you are new to the UI in 7.0, you can use the global search option as shown below.
-
You can increase the aggregate to 20Mbps but single stream, it will only cap out at 10 Mbps. You would use policy routing or the SD-WAN groups with redundant tunnels to achieve the goal.
-
Hey @Dave_Loveridge, can you paste the drop code from the packet capture? It should show when you click on the drop entry at the bottom.
-
@Enzino78 , please look at the Gen7 TZ 570/670 for 1 GB throughput.
-
As @preston said, the Gen7 TZ's are basically silent.