Comments
-
It was confirmed that is not possible at the moment by SonicWALL SE.
-
Dear @Darshil Greetings! As per my experience, none of firewall migration tools are 100% complete and i would recommend you to use Sonicwall migration tool covert as text/CLI. you can get configuration commands from the text. Thanks, Ananth
-
Dear @edir As @Saravanan mentioned in Active/Active scenario, you should need downstream or upstream device to select the gateway accordingly. you may configure Policy Based Routing based on source/destination or even ports. If your downstream device support ECMP (Equal Cost Multiple Path ) routing then you can achieve…
-
Dear @shultis , You may also try to get configuration backup from the firewall and try to upload and convert it using MySonicwall tool into text file. in the text, you can get it everything including with objects, app rules, content rule. Thanks, Ananth - Connex IT
-
Read: https://www.sonicwall.com/support/knowledge-base/best-practices-for-administrator-managing-sonicwall-firewall-appliances/200506231816470/
-
Dear @Cybron, In this case, you should use one of the usable IP address in the range and you can't use both network IP or broadcast IP in any interface. Example : 123.231.43.0/28 Network ID: 11111111 11111111 11111111 11110000 Total 32 bit - 28 = 4 Last Incremental is 16 Usable IP: 16-2 = 14 usable IP in range Network IP :…