Comments
-
It is Site to Site, I did disable the security services on the VPN zone, but on the Capture ATP Scanning History files are still getting scanned on the VPN. Does the firewalls need restaring?
-
Yes, that is it.
-
The ISP gave me 3 IPs. 2 to configure the connection between my firewall and their device and 1 Public IP. The public IP wasn't supposed to be configured on the WAN port, but I did it anyway. I configured it on the WAN port with the default gateway pointing to the ISP device (one of the 2 IPs that I had to configure for…
-
I think that I was able to fix my problem. :D
-
1st option, they won't already tried that before. 2nd option, can't really do that now. 3rd option, I did, didn't find anything that could help me out. Thank you for your help, I'll try something on my side.
-
So without the Public IP configured on the WAN, I'm out of luck? What do you advise?
-
With the configurations that I've made, we can get internet access. But for example if we try to connect via SSL to the public IP or try to create a IPSec tunnel it doesn't work. It looks like the Public IP isn't being forwarded to the subnet that is configured between firewall and ISP device.
-
Yup it looks like it... They are doing bridge, they gave me a subnet to use between my firewall and their equipment. Then I have to NAT any to wan with the public IP.
-
Also, it created some routing rules but for some reason they show up as "turned off" which is also weird, because this happens when the interface is disconnected.
-
That would be really appreciate it. By the way Michael, I found out that the AppFlow monitor works the opposite way, 1st I need to pick the Initiators IP that have threats, there's a "Threats" column there, then I'll be able to go into the Threats and see the threats for that IP.
-
Is there a way for me to check the available memory?
-
Hello Michael, it looks like I have no threats. The snip that I've attached were blocked. So probably they won't show on the AppFlow Monitor.
-
Thank you for your reply! :) I've been trying the Advanced version of capture client. Would it be viable to install this on a Linux server with a website that can be seen by the outside?
-
I'll try the trial. This will install any anti malware software on the endpoints?
-
Hello Saravanan, I was able to teste it, didn't work. I've had a chat with the ISP, I think that we'll be able to sort it. I hope so.