BartMan

Newbie ✭
Default Avatar

Join the Conversation

To sign in, use your existing MySonicWall account. To create a free MySonicWall account click "Register".

BartMan Newbie ✭

Badges (5)

1 Year Anniversary2 Year Anniversary10 CommentsName DropperFirst Comment

Comments

  • ADDITIONAL UPDATE: This is working now. The Internet access issue was caused by a routing table fubar on my test box, rebooting it fixed that problem. The initial issue was caused by my own mistake of which uplink I was configuring on the switch. The sonicwall and netgear were not to blame. The configuration is sound,…
  • UPDATE (partially working now, my fault): Well, so far I found something I missed and discovered that I CAN now ping the Sonicwall's X0:V10 interface successfully while hooked up to an untagged member port on VLAN10, and I can also get DHCP from the Sonicwall's DHCP server successfully. STILL BROKEN: Not able to browse…
  • Hi Drew, No luck trying to set up the DHCP scopes on the Sonicwall first, unfortunately. Could you re-confirm with me how you have your Netgear switch set? Just for the sake of my sanity. Also, unfortunately the Sonicwall support agent I spoke with wasn't able to provide ANY Layer 2 insight whatsoever. He pretty much…
  • Hmmm, that's an interesting possibility, thanks Drew. I'll give that a try and report back.
  • Thanks for your suggestion Preston, but I'm not looking to reach the VLAN I spent a lot of time outlining ( VLAN10 ) from the LAN zone. What's failing to happen is that I cannot pass traffic through X0:X10 to the WAN from a node attached to an untagged port which is member of VLAN10 - DESPITE an access rule allowing any…