Menu

Join the Conversation

To sign in, use your existing MySonicWall account. To create a free MySonicWall account click "Register".

Sign In Register

Can't see DVR behind firewalls DMZ

JGollJGoll Newbie ✭
in Entry Level Firewalls

Hello,

I set up a DVR on our network and configured it to be on a DMZ through the x4 interface. I figured that the DMZ would just be open and devices would be able to be seen externally, but I can not connect to it.


I then attempted to do some port forwarding and that still didn't help any.


Any advice would be awesome!


I'm using a TZ300

SonicOS Enhanced 6.5.4.7-83n


Thanks,


James

Category: Entry Level Firewalls
Reply
Tagged:

Best Answers

  • CORRECT ANSWER
    SaravananSaravanan Moderator
    Answer ✓

    Hi @JGOLL,

    Thank you for visiting SonicWall Community.

    Based on your description, the issue is pertained to port forwarding. Could you please let us know if you have configured the port forwarding as per format given below?

    NAT Policy:

    Source: Any, Translated Source: Original, Destination: Public IP, Translated Destination: Private IP of the DVR, Service: Any or Select the Service Object/Group meant for DVR, Translated Service: Original, Inbound Interface: WAN Interface, Outbound Interface: Any.

    Create a WAN to DMZ to access rule:

    Source: Any, Destination: Public IP, Service: Any or Select the Service Object/Group meant for DVR, Action: Allow.

    This should work. Please give a shot and let us know.

    Regards

    Saravanan V

    Technical Support Advisor - Premier Services

    Professional Services

  • CORRECT ANSWER
    SaravananSaravanan Moderator
    Answer ✓

    Hi @JGOLL,

    Yes, please create the objects and groups manually if needed. What I gave is just a Syntax. 🙂

    Regards

    Saravanan V

    Technical Support Advisor - Premier Services

    Professional Services

Answers

Sign In or Register to comment.