Join the Conversation

To sign in, use your existing MySonicWall account. To create a free MySonicWall account click "Register".

Out of IP addresses

Hi,

I have a NSA 2650

My main subnet 10.3.64.0 has run out of IP addresses. How can i create a VLAN that still routes through the main subnet?


Thanks

Category: Firewall Management and Analytics
Reply

Answers

  • AjishlalAjishlal Community Legend ✭✭✭✭✭

    Hi @JAlkazian

    Create one additional LAN zone. example navigate to Network | Interfaces.

    The sonicwall will handle routing automatically as long as they are in the same zone, no static routes required. If they are in different zones, add firewall rules allowing the traffic. Everything else (NAT included) will be added automatically.

  • JAlkazianJAlkazian Newbie ✭

    Thank you so no Vlan? How do the PCs know which interface to use? I cannot separate the physical network

    Also, once it is set up, I need the new interface or VLAN to use a different IP to route to the internet

  • AjishlalAjishlal Community Legend ✭✭✭✭✭

    Hi @JAlkazian

    Connect a L2 switch into the new LAN interface and create a DHCP scope / pool for the PC's.

    If you need to create VLAN with the X0 subnet please follow the below article;

    But you must have to configure the switch port with VLAN tag ID for the new VLAN.


  • JAlkazianJAlkazian Newbie ✭

    Ok... i am starting a new thread as i think i convoluted this one...

    Thank you for your help and please keep an eye out for my next one

Sign In or Register to comment.