Menu

Join the Conversation

To sign in, use your existing MySonicWall account. To create a free MySonicWall account click "Register".

Sign In Register

TZ370 hardware data, RAM, CPU

MariuszMariusz Newbie ✭
in Firewall Management and Analytics

I would like to know what commands (in command line) can be used to check the hardware of the TZ370 device. I mean displaying the amount of RAM and processor (type, frequency, number of cores, etc.). For example, in Fortigate devices, this can be easily displayed via CLI mode.

Category: Firewall Management and Analytics
Reply

Answers

  • LarryLarry All-Knowing Sage ✭✭✭✭

    Have you looked through this document:

    https://www.sonicwall.com/techdocs/pdf/sonicosx-7-command-line-interface-reference-guide.pdf

  • MariuszMariusz Newbie ✭

    I didn't find the answer I was interested in there. There is a command to display data about RAM size, but nothing about CPU parameters.

  • LarryLarry All-Knowing Sage ✭✭✭✭

    That information may not be available.

    Suggest you open a ticket with SonicWall Support and request the specific information you desire to see if it is obtainable.

  • MariuszMariusz Newbie ✭
    edited October 23

    Perhaps, although I don't think it should be a secret.

    I found photos of the interior and motherboards:
    https://fccid.io/2AKCZ-101/Internal-Photos/Internal-Photos-4998046

    The processor is Marvell® ARMADA® 7040 (88F7040):
    https://www.marvell.com/content/dam/marvell/en/public-collateral/embedded-processors/marvell-embedded-processors-armada-7040-product-brief-2017-12.pdf

    Does the C120 designation mean 1200MHz?
    For TZ370W it is C120 and for TZ470W it is C140.

    TZ570W has a different processor: Marvell® OCTEON TX2™ CN9130 - is clearly faster.
    I don't know what's in TZ270W

    All this applies to the wireless version.
    But I suspect it's the same for devices without the "W".

Sign In or Register to comment.