SonicOS 7 for TZ400
Best Answer
-
shiprasahu93 Moderator
Hello @Ernesto75,
Unfortunately, no. SonicOS 7 is only for the Gen 7 hardware like TZ 570 and 670 and SonicOSX 7.0 is for virtual firewalls like NSv 870 etc.
TZ 400 is a Gen 6 hardware and will have a 6.x firmware available.
Thanks!
Shipra Sahu
Technical Support Advisor, Premier Services
5
Answers
Hi @ERNESTO75,
I doubt if there will be a SonicOS 7 firmware release for the Gen 6 products like TZ 400, etc,., This is because, there is architectural change on the Gen 7 product. So, the firmware's supporting Gen 7 products need to be special than SonicOS 6.0 release.
Hope this helps.
Regards
Saravanan V
Technical Support Advisor - Premier Services
Professional Services
I have a TZ470 , recently procured and upgraded to version 7.1.2.
It worked well with factory default ver 7.0. Now the box goes in maintenance mode when cold started.
Has to be powered-off and back on to make it functional. TAC suggests to reset this to factory default to remove any setup of configuration glitch. We failed to understand the resolution against the issue.
Pls assist.
..Ajit
just a suggestion: might be the rom with is buggy (had something similar with a gen6 sonicwall) - sonicwall support can figured it out/help