Azure vpn to site to site locations
Drew_Schwedland
Newbie ✭
I have a VPN from my Home Office firewall to Azure and then all of my other remote locations. I'm trying to figure out how to route the traffic so I can access a web server in azure from my remote sites and visa versa.
I have tried to use routing policies, NAT policies, and adding the network for the subnet into my site to site IP addresses, and setting up access rules to and from the Azure LAN to no avail. I assume I'm doing something wrong and would greatly appreciate some insight into what I'm doing wrong.
When I set up the access rules, I can see traffic hit the access rule to the Azure LAN, but not from the Azure LAN back to the remote site. Any help would be appreciated with this.
Category: Entry Level Firewalls
Tagged:
0
Answers
@Drew_Schwedland
Hi Can you make sure the site to site VPN tunnel configuration as same below described KB;
@Ajishlal
Yes it is set up that way. I can get to the network from my home office where the VPN is configured to, but I can't access it from the other remote locations connected to my home office by VPN and that's what I'm trying to do