Just shaking to a SWS14-24FPOE with firmware version v1.2.0.0-5 and waswondering if its possible to change the management vlan to something other than vlan 1? I've not had any success via the CLI or GUI.
Sorry for the broken english in the original post.
Hey everyone,
Just shaking a SWS14-24FPOE with firmware version v1.2.0.0-5 down and was wondering if its possible to change the management vlan to something other than vlan 1? I've had zero success via the CLI or GUI.
Answers
Sorry for the broken english in the original post.
Hey everyone,
Just shaking a SWS14-24FPOE with firmware version v1.2.0.0-5 down and was wondering if its possible to change the management vlan to something other than vlan 1? I've had zero success via the CLI or GUI.
Thanks in advance!
It doesn't seem likely. Pertinent sections (page 16-18) of the admin guide makes no mention of the ability to change the management VLAN.
Thanks a million! I've dug into both the CLI and GUI white pages and don't see any documentation on that.
It doesn't seem to be documented anywhere but there is a privileged CLI command that has worked for me using the serial port:
switch(config)# set ip-managment-vlan <VLAN ID>
We're mostly a Cisco shop here so using VLAN 1 for management isn't ideal and we prefer to keep those interfaces to a firewalled subnet.