How do I enable wireless printing with OS 7.X

CHAZ08361 · June 2022

Is it the same as with OS 6.5?

Vivek · June 2022

Hi @CHAZ08361 , thanks for the question. The configuration to enable access would be the same as on the 6.5 firmwares. Are you attempting to configure this for the first time ? Is there a drop in traffic ?

CHAZ08361 · June 2022

Thank you very much.....and yes I am configuring this for the first time. I have no drop in traffic it just will not connect. I can't even "see" it when searching for printers. As I understand this is the default for security purposes.

Vivek · June 2022

Hello,

While it is a little difficult to provide steps over here , what you would need to look at are the access rules to ensure that communication from one zone to another is opened and thus allowed to flow. I believe the following three articles should be of help to get you started to atleast make sure that the configurations are in place:

https://www.sonicwall.com/support/knowledge-base/which-ports-are-used-by-network-printers/170503664134344/

https://www.sonicwall.com/support/knowledge-base/wireless-unable-to-print-to-a-printer-on-the-lan-zone-from-the-wireless-zone/170505389728649/

https://www.sonicwall.com/support/knowledge-base/how-can-i-open-ports-on-the-firewall-using-the-quick-configuration/170503853090538/

Join the Conversation

How do I enable wireless printing with OS 7.X

Best Answer

Answers