To sign in, use your existing MySonicWall account. To create a free MySonicWall account click "Register".
We are looking at replacing our TZ600's with TZ760's. I see the TZ670's have (2) SFP+ 10GB ports - can those be used as X0 and/or X1? Our new fiber modems have 10GB ports.
You can configure the SFP ports as both LAN and WAN ports, just be sure to change your backend communication port to the active WAN.
The TZ670 has two (2) SFP+ ports (10GB), but only one (1) can be a 10GB port. The other will be limited to a 1GB. Just thought I'd mention it.
PAUL_D, Where do you see this? I'm running my TZ 670 with both ports 10Gb. What firmware version are you on?
Thanks,
I confirmed with my account manager/engineer that both can be active at 10GB.
I have both 10g ports on my 670 at home connected and running at 10gbps Full. No issues.
ratherman
Newbie ✭
Answers
You can configure the SFP ports as both LAN and WAN ports, just be sure to change your backend communication port to the active WAN.
The TZ670 has two (2) SFP+ ports (10GB), but only one (1) can be a 10GB port. The other will be limited to a 1GB. Just thought I'd mention it.
PAUL_D, Where do you see this? I'm running my TZ 670 with both ports 10Gb. What firmware version are you on?
Thanks,
I confirmed with my account manager/engineer that both can be active at 10GB.
I have both 10g ports on my 670 at home connected and running at 10gbps Full. No issues.