Cannot add NetBIOS Address Object on TZ 670
scottkeen
Newbie ✭
Our TZ 670 with the latest 7.0.0-R906 firmware will NOT allow me to create a NetBIOS Address Object per the SonicWALL Knowledgebase instructions here:
The instructions say to create an Address Object:
Name: NetBIOS
Zone Assignment: LAN
Type: Host
IP Address: 255.255.255.255
It fails with an "invalid IP address" red error message. It works fine on our older NSA 2600
Please advise.
Category: Mid Range Firewalls
0
Answers
Hello @scottkeen,
I remember this error popping up even on some Gen 6 appliances. But, by just enabling NETBIOS under SSLVPN, are you unable to get the NETBIOS to flow between the local network and SSLVPN client?
Thanks!
Shipra Sahu
Technical Support Advisor, Premier Services
Hi @scottkeen,
This same thing I noticed initially but once you finish enter the IP address it will disappear that warning message.
See the below screen shot for your reference.
Thanks, but I want to selectively allow/disallow NetBIOS by user/group. I didn't want to have a global on or off.
Thanks but this is not correct.
After you hit "SAVE" you get the "Invalid IP" error message. See my screenshot.
Did you ever find a solution to this? I have the exact same problem on a TZ370 with the latest firmware.