I have interface 1 (Vlan1) and interface 5 (Vlan99) and interface 8 (Vlan301) all connecting to the same LAN. I have DHCP scopes enabled on all three interfaces (for different routes and purposes). My cisco person indicated that the Vlan301 devices are showing up as Vlan1 devices and they are getting their IP Address from Vlan1. I created static entries associating their Ethernet address to use the IP Address in Vlan301 for said devices yet they still get an IP Address from Vlan1. I thought that if there are entries in the firewall with instructions that said Ethernet address, it would redirect send the Vlan301 IP Address but that is not the case. Is there a way to make the firewall to force the reserved IP Address to the device no matter which interface it tries to connect to?