Using a TZ400 firewall as a local sites DHCP Server.
We are using a TZ400 as a local DHCP server at all of our remote locations. The issue is, the TZ400 is config to use the following scope: issue IP addresses in this range: 192.168.XXX.130 to 192.168.XXX.210. Gateway is : 192.168.XXX.1 DNS is 192.168.XXX.1 and/or 192.168.0.8 or 10.2.10.82. The X's in the 3rd octet represents the remote location id. For example: 192.168.1.1 = remote location 1, 192.168.02.1 = remote location 2, 192.168.12.1 = remote location 12, etc.... The issue is this when a a client connects to the network at the remote location. the ip address the client receives is from the corp office and not the remote site. To make matters even weirder, if the client at the remote site obtains a ip address from the corp office and the ip address is already in use. I don't get any ip conflict issue. I have compare the setting with a few of the remote site and nothing sticks out as being different or unusual. any thought?