Is it SDWAN load balancing?
Chathura_Yapa1
Newbie ✭
I have some doubt regarding sonicwall SDWAN feature. Think i have 3 wan links and i configured all 3 links for SDWAN. think the situation like all 3 link qualified.
Q1.) Now are network traffics load balance between 3 links? if it is load balance, then which method used? round-robin or any ?
Q2.) think i have enable ratio in our load balnce group, wan1-50%, wan2-30%, wan3-20%. And also i am going to SDWAN all 3 link for internet access. (default route through SDWAN). In this senario also think all 3 link qulified.Now whats happen? Is it follow loadbalance ratio or any other method for traffic loadbalance?
Best Answers
-
CORRECT ANSWER
Ajishlal
Community Legend ✭✭✭✭✭
SD-WAN is best used for specific traffic types and/or applications requiring dynamically chosen optimal destination interfaces depending on how the network paths are behaving. To operate well, each application has a certain requirement from the network path. For example, the network quality for VoIP to operate well requires the optimal latency to be 100 ms or less while a latency of 150 ms or higher results in choppy calls. SD-WAN helps in such scenarios by first dynamically measuring the various network performance metrics, such as latency, jitter and packet loss, on multiple network paths. SD-WAN then compares these metrics with the performance threshold for a particular traffic flow and determines the optimal network that meets the flow’s network quality accordingly. -
5 -
CORRECT ANSWER
TIJU
Moderator
The load balancing in SDWAN is connection based. Connections are shared equally between the WAN links
5