It looks like you're new here. Sign in or register to get started.
After upgrade the Gen 5 Firewall Firmware 188.8.131.52-5o (SOHO Units), Sonicwall Login console changed to Dell Sonicwall.
Before upgrading the Firmware:
After the Firmware upgrade (184.108.40.206-5o):
HI @msmfarhan ,
If you are still getting, the Dell logo after upgrading to 220.127.116.11 , try a control f5 to refresh the browser, if it still doesn't go then type in the below but replacing with your IP address, then enter
If you are still having no luck then go to Users/Status and scroll down to the Customize Login Pages
and select Login Authtication from the drop down and at the bottom select Default and then accept and then logout and try again.
Hi @Micah @shiprasahu93
Please see all our Gen 5 units are showing DELL Sonicwall after the firmware upgrade.
it may not affect all units, I still have a NSA 3500 floating around and it constantly shows the SonicWall logo.
Just in case, did you cleared the browser cache and tried another browser?
Maybe the development team pulled back some resources from the repository to address the issues found <just kidding>.
Its affected only Gen 5 units not GEN 6. Gen 6 units I tested and its working fine
That's why I mentioned NSA 3500, a silverish Gen5 box :)
Hi @BWC ,
Even I tried from different location PC (through Team Viewer) I am getting same Dell Logo.
See the below screen shot from the Private browser. we do have more than 150 SOHO unit and all are showing the same after the Firmware upgrade (18.104.22.168-5o).
NB: We don't have any NSA GEN 5 unit for testing.
I'll check tomorrow when I'am back at the office, I guess I have an old SOHO sitting around somewhere.
What firmware was installed before? Was it DELL branded or already with the SNWL logos? If it was DELL branded, maybe the firmware upgrade did not came with the new image files, just a wild guess.
I just updated a TZ-215w from 5.9.13 to 22.214.171.124 and got the exact same thing. Thought I might be the only one until I came across this thread.
Everything else seems perfectly fine. Really weird.
Confusing ... 126.96.36.199 and 188.8.131.52 released the same day?
Doc update revision stamps are around the other way?
@HALON5 - Yes, both these versions 184.108.40.206 and 220.127.116.11 got released on the same day for various requirements. Requirements can be obtained from the release notes of these documents respectively.
@MO_TMS - Please have this reported to our Support team to get it addressed at the earliest.
Technical Support Advisor - Premier Services
Hi @Saravanan ,
The only requirement I want or need is to get the latest firmware with cumulative fixes.
Are you saying something "else" is going on?
Is .13 not the latest?
Nope, there is nothing going around with 18.104.22.168 version. Ultimately, this is the latest firmware for all Gen 5 devices. If you can share the numbers (Bug ID) of the cumulative fixes that you are looking for on this firmware version, I can possibly help out to confirm.
Would you kindly point out the specific difference between the two? What do you mean by "requirements".
Why have two releases been made on the same day for the same units?
@HALON5 - Please read the release notes of the respective firmware versions for differences and their characteristics.
What I meant by requirements was, lets say you got suggested to upgrade the firmware on your SonicWall to a specific version as a fix for a specific issue then that's a requirement scenario. The scenarios may vary and what I told you is an example.
I have read the release notes. From a customer point of view it is confusing. 22.214.171.124 "Appears" to be the latest since the level is higher.
Why wouldn't you just apply 126.96.36.199 since it expected that any fixes in it also contain those in 188.8.131.52
Please give me an example of why you would apply 184.108.40.206 over .13 ? Because you don't want to fix something? Is .13 broken?
It's just weird.
Please find answers to your questions below.
Answer: Agreed. I will inform the document team to make it much more reader friendly.
Answer: Not necessarily any latest firmware version can fix problems reported on the predecessor firmware. An example is, 220.127.116.11 firmware version may contain fixes for the issues reported on the previous versions. The firmware 18.104.22.168 version simultaneously releases containing new features that are originated only from this version. Hence the necessity to check with either our Support team or reading release notes would help clarify and choose the right firmware version based on the issue/requirement for the SonicWall appliance. In this similar situations, we always try to accommodate all the fixes on the latest version but this can change and there are exceptions.
Answer: The example given to your above question applies here as well.
First question in the below KB article talks about the different firmware flavors/releases available.
Well, your feedback is always helpful to groom our product and its associated resources to a greater extent. We are always grateful to our customers on this part. Thanks for your feedback on the documentation release notes part.
Please let us know if any questions or clarifications.
Could you please let me know that, why its showing DELL Logo after the firmware upgrade instead showing the SonicWALL logo?
I digged on my graveyard and updated a SOHO from 22.214.171.124 to 126.96.36.199, it became SonicWall branded. Then I downgraded to 188.8.131.52 and it became DELL branded.
As @Halon5 mentioned, it's very confusing from a customer point of view having multiple releases, there should be just a single latest firmware. It's ok if you have multiple branches 5.9.1 and 5.9.2, but the forth digit should show just be an indicator what the latest is in that specific branch, IMHO.
According to me it looks like a code issue and definitely not something with the firewall configuration. An appropriate way in getting this addressed is to raise a support case with our support team.
Our existing Gen5 units are running on 184.108.40.206-5o, Until now we are not faced any issue and its stable. But as per the sonicwall recommendation for fixing the vulnerability we would have to upgrade the firmware so kindly let me know which Firmware should need to use out of the below list; As per the list both firmware will cover the vulnerability.
NB: Upgraded around 25 units with firmware version 220.127.116.11 and noticed that DELL Logo after the upgrade so stopped the remaining unit Firmware upgrade.
the Releases Note of 18.104.22.168 mentioned it's an update for 22.214.171.124 and the 126.96.36.199 mentioned the same for 188.8.131.52.
It's weird, but you probably should go with 184.108.40.206 which seems to be the direct successor of 220.127.116.11.
Yeah its really weird. Even in the Mysonicwall download portal showing the latest is 5.9.27 under the maintenance release.
I think this is the first time SonicWALL released 2 maintenance release on same day and its confusing the customer and there is no proper guidelines.
Sorry for the inconvenience. I know how much frustrating it would be. I would feel the same way if I were at your place. This is totally code based issue on the firmware. Please approach our support team to report the issue to our back-end team and find a fix.
Hey @Saravanan ,
Some things to consider.. https://www.youtube.com/watch?v=KolL4CkWJ1w
Thanks @BWC , @Ajishlal
We have a bunch of Sonicwalls running 18.104.22.168. I noticed the 22.214.171.124 and 126.96.36.199 release.
After reading this thread, I am still confused.
you should be good to go with the 188.8.131.52.
I replaced 184.108.40.206 with the 220.127.116.11 release and until now no issue. You can go ahead with 18.104.22.168 release.
Even after 22.214.171.124 upgrade, dell logo didn't disapear.
Hi Preston, this worked for login page. But still Dell logo shows up after logging in