To sign in, use your existing MySonicWall account. To create a free MySonicWall account click "Register".
Basiclly there is no traffic in the network.
Ping goes to 600ms when I am logged into administrator.
There is any logs I could look up for diagnostics?
CPU/RAM are stable at 60%.
While you are performing ping tests are you connected directly to the SonicWall interface or through a switch?
What is the firmware on the firewall and since when are you facing this issue? Did you make any firmware upgrade or configuration changes after which you started having this problem?
Here are a few KB articles that should be helpful.
Technical Support Advisor, Premier Services
@shiprasahu93 Thought a switch.
The problem started from nothing actually.
It happened since firmware 6.5.3.x, no I'm on 188.8.131.52.
I would suggest testing once by directly plugging a computer to the SonicWall's X0 interface. To avoid any port issues, please configure a static IP on any unused port and test from there as well by connecting a computer directly.
Also, are you seeing this high latency just for internet traffic like while pinging 184.108.40.206 or even the firewall IP address?
Just to the firewall IP address.
Were you able to test this on X0 or any other free interface by connecting a computer directly to the interface?
Not yet, as soon as possible, I will test it.
Sure, keep us posted!
Running iPerf on the network LAN -> LAN, it could be a pysical problem? @shiprasahu93
I wanted to remove the switch from the network to eliminate such issues. Is it possible that there is some kind of multicast/broadcast storm going on the LAN switch?
Were you not able to test with directly connecting to the SonicWall?
Sorry! I did test directly thought WAN, same behavior.
I'm testing to see if there is a higher broadcast, there is any KB for that?
I was actually talking about the storm on the switch. But you can check the interface statistics under MANAGE | Network | Interfaces to see if it looks extremely high for X0.