Cannot reach IP through a VPN. NSA 2650 & TZ670
Got an interesting situation that I would love your advice on…
Site A – SonicWall NSA 2460
Secondary router from a DMS company at 10.3.64.17 that VPN routes to 220.127.116.11 (their DMS system)
Site B – SonicWall TZ670
I have a VPN tunnel that connects all subnets via static routes and I can ping back and forth through the VPN tunnel, including the DMS router 10.3.64.17 on site A. My issue is that I cannot reach their DMS system 18.104.22.168 from Site B through the VPN tunnel. I am sure I am missing something?
I tried to create a static route to 22.214.171.124 from Site B but because I cannot ping it, the route doesn’t work,
Has the DMS company added routing back you your subnets?
yes... they put a route back to the 10.3.62.0 subnet
Let me clarify a bit because as i have gone through this, i see where the issue may be.
Site A 10.3.63.0, 10.3.64.0 and 10.3.65.0
VPN Tunnel to Site B 10.3.62.0
Each side is routed back and forth and i can ping all subnets both ways
The issue is that site A has a vendor's router (10.3.64.17) that has a VPN to 126.96.36.199.
My challenge is i cannot reach 188.8.131.52 from site B - the vendor's router NATs from 10.3.64.17 to 184.108.40.206 and has a route back to site B
Thanks for any help you all can add
could you share connection monitor for both site screenshot during ping each others
not sure how to create a connection monitor (on the sonicwall?)
you can find under the Dashboard / Connection monitor
Site B went straight out to the internet and not through the VPN
Site A did not go through the SonicWall and when straight to the vendor's router